HomePage Introduction Quality Assurance Market Services Inquiry Online Contact Us
 
PRODUCT INFORMATION
 
 
    Drilling Rig & Rig Parts
    Downhole Tools
    OCTG
    Wellhead Equipment
    Handing Tools & Power Tong
    Featured Products
 
CONTACT US
 
 
Tel: 0086-29-81138812
Fax: 0086-29-81138812
Email:
sales@scotonoilfield.com
scotonbabala@hotmail.com
 
 
 
 
 
 
 
Product Show
Completion Equipment
Flow Control Tools

MF & MR Landing Nipples
The MF Nipple is a top NO-GO or selective nipple which provides for the location of various wireline flow control devices in the production string. Be sure to consider carefully the location and number of the model MF seating nipple to provide maximum versatility in the positioning of the various flow control accessories.

MX & MXN Landing Nipple
The MX Nipple offers an expanded versatility to downhole selection. Any desired number of MX Nipple can be placed in the production string, thereby offering an unlimited number of positions for setting and locking surface controls.

ML Circulating Sleeve
ML Circulating Sleeve is a downhole flow control device mounted in the production tubing to provide communication between the tubing and casing annulus.

MXO MXA & MXD Circulating Sleeve
The MXO circulating sleeve is a downhole flow control device mounted in the production tubing. It effectively controls the flow between the tubing and the casing annuals by means of internal sleeve that is opened and closed by standard wireline methods.

Bridge Plugs

CTRBP-1 Retrievable Bridge Plugs
Model “CTRBP-1” Retrievable Bridge Plugs set automatically by pressure from above or below. They may be retrieved and reset on a single run. A fluid by-pass prevents swabbing danger. Slips are fully retracted while running or retrieving. Design simplicity adds to their dependability. They are available for 4 1/2” through 13 3/8” casing.

FPE Frac Plug
Model FPE Frac Plug provides an economical alternative to the use of a cement retainer in temporary zone isolation for fracturing or other treatments. Much simpler, they do not require polished bores because the bridging ball is dropped and seated on top of the plug. The Model FPE Frac Plugs may be used in run frac baffles and where formation pressures are about equal. They are often used where more than one zone requires stimulation and where production of zones is co-mingled when the well is opened to production. Recommended to 7,500 PSI at 200°F.

MMB Mechanical Bridge Plug
Model MMB Mechanical Bridge Plugs are used to isolate zones for temporary or permanent abandonment. These drillable BridgePlugs set securely in any hardness casing. A ratchet lock ring stores the setting force in the Bridge Plug. The one piece packing element and metal back up rings combine for a superior seal. The case hardened, one piece slips virtually eliminate premature setting, yet can be easily drilled out. They are available for 4 1/2” through 16” casing.

MWBR Wireline Set Bridge Plugs (Retrievable)
Model “MWBR” wireline set retrievable bridge plug is a medium performance retrievable bridge plug that is run and set by a wireline pressure setting tool and retrieved by either tubing or sandline. The plug is used for zone isolation, formation fracturing, acidizing, and wellhead repair and can be lubricated in and out of the well under pressure, thereby eliminating snubbing tubing or killing the well. The plug features a balanced equalizing value located immediately above the three piece multi-hardness packing element system. Caged, bi-directional, one piece slips are located below the packing and firmly anchor the plug against pressure differentials from above or below. The plug is retrieved by ratcheting onto the retrieving neck, picking up four inches to equalize, setting down to uplock, then picking up to remove from well. No rotation is required to retrieve.

MWB Wireline Set Bridge Plug
Model MWB Wireline Set Bridge Plugs are compact, small OD and designed for easy drill out. These Bridge Plugs will set securely in all but the very highest tensile casing. A ratchet lock ring stores the setting force in the Plug. The one piece packing element and metal back up rings combine for a superior seal. The case hardened, one piece slips virtually eliminate premature setting, yet can be easily drilled out. They are available for 2 3/8” through 20” casing.

Packer

Retrievable Packers
AS1X-HP Mechanical Set Retrievable Production
The Model AS1X-HP single string Mechanical Production Packer is a retrievable, double-grip compression or tension-set production packer that holds pressure from above or below. Once set the tubing string can be left in tension, compression, or in a neutral position. A large internal bypass reduces the swabbing effect during run-in and retrieval, and closes when the packer is set. When the packer is released, the bypass opens first, allowing the pressure to equalize before the upper slips are pulled from the casing. The Model AS1X-HP also features an upper slip releasing system that reduces the force required to release the packer. A non-directional slip is released first, making it easier to release the other slips. These flexible features allow the AS1X-HP to be run in a variety of applications ranging from Production Packer to Bridge Plug to Service Packer.

JS-1 Retrievable Packers
Model JS-1 Retrievable Casing Packers are full opening, set down type hook wall packers that are applicable for a wide variety of well treating and producing installations. The packers are available in 8-5/8”, 9-5/8”, and 13-3/8” O.D. casing and feature a large internal bypass through the packer which communicates with a surface controlled set-down face seal type valve. The bypass provides free flow of fluids through the packer during running, retrieving, and circulation, thus greatly reducing packing element swabbing and button slip wicker dulling. These packers are used when high differential pressure from below the packer is anticipated and utilizes hydraulically actuated button type slips to anchor the packer against upward movement. They are available for 8 5/8” through 13 3/8” casing.

MFH Retrievable Hydrostatic Packer
Model MFH Retrievable Hydrostatic Packer is used in production, injection and zonal isolation. It can be run in single or multiple zone installations. It is recommended for deviated wells where conditions are not suitable for mechanical or wireline set packers. No tubing movement is required or generated to set the packer. Once set, the packer is locked in place by one-piece no-directional slips. The packer can be released by straight pull . They are available in 4 1/2” through 9 5/8” casing.

MR-3D Double Grip Retrievable Packers
Model MR-3D Double Grip Retrievable Casing Packers are used in production, stimulation and testing applications. Their hydraulic hold down is below the pressure equalization valve. They feature a proven three element packing system and a balance sleeve device to assist in keeping the by-pass closed. They are available for 4 1/2” through 9 5/8” casing.

MR-3S Single Grip Retrievable Packer
Model MR-3 Single Grip Retrievable Casing Packers are used in production as a convention long stroke Packer. They feature a proven three element packing system and a large by-pass area through the Packer. They are available for 4” through 9 5/8” casing.

PHP-2-SR Hydraulic Setting Packers
Model PHP-2-SR Retrievable Hydraulic Packers can be run in single or multiple zone installations. It is recommended for deviated wells where conditions are not suitable for mechanical or wire line setting packers. No tubing movement is required or generated to set the packer. Once set, the packer is locked in place by one-piece bidirectional slips and will hold high differential pressures. The packer can be released by either straight pull or right-hand tubing rotation. An equalizing and by-pass feature is incorporated in the release mechanism. They are available for 5” through 9 5/8” casing.

PC-1 Retrievable Packers
Model PC-1 Retrievable Packers are used for a variety of well treating and producing operations including squeeze cementing, formation fracturing, acidizing and testing. The PC-1 is a versatile tension set tool that holds differential pressure from above and below. It has a full opening bore that allows unrestricted fluid flow and easy passage of wire line tools. It is ideal for straddle operations using the Retrievable Bridge Plug. They are available for 3 1/2” through 9 5/8” casing.

Production Packers

DGL Production Packers
Model DGL Production Packers are used on installations requiring premium production equipment for high temperatures and pressures. These wireline set millable packers are available for 2 7/8” through 11 3/4” casing.

DGLF Production Packers
Model DGLF Production Packers have an extra larger ID upper sealing bore for use with multiple packer installations. These wireline set millable packers are available for 2 3/8” through 7 5/8” casing.

DGXL Permanent Production Packers
Model DGXL Permanent Production Packers have a larger ID through the packer bore making them an excellent choice for parallel string installations and similar applications. These wireline set millable packers are available for 4 1/2” through 9 5/8” casing.

DHL Permanent Production Packers
Model DHL Permanent Production Packers have a smaller ID through the packer bore making them an excellent choice for use as a lower packer in multiple packer installations. These wireline set millable packers are available for 5” through 11 3/4” casing.

Service Packers

CS-1 Retrievable Packers
Model CS-1 Retrievable Packers are used for a variety of well treating and producing operations including squeeze cementing, formation fracturing, acidizing and testing. These double-grip, single-string packers have a full opening bore that allows unrestricted fluid flow and easy passage of wireline tools. They also include hydraulically actuated upper button type slips and a built in pressure relief unloader. They are available for 4 1/2” through 7 5/8” casing.

JS-2A Retrievable TCP Service Packer
Model JS-2A Retrievable Packers are used in Tubing Conveyed Perforating and Single Trip Production, stimulation, perforating, gravel packing and testing applications. The hydraulic hold down is below the pressure equalization valve. The tool features a proven three element packing system and a hydraulically controlled balance piston designed to keep the by-pass closed when set. The tools are available in 4 1/2” through 16” casing.

JS-3 Retrievable Storm Packer
Model JS-3 Retrievable Storm Packers are also used in Production, stimulation, perforating, gravel packing and testing applications. The hydraulic hold down is below the pressure equalization valve. The tool features a proven three element packing system and a hydraulically controlled balance piston designed to keep the by-pass closed when set. The tools are available in 7” through 16” Casing. Comes standard with API IF thread forms.

Tubing Anchors

TAC-1 Tubing Anchor
Model TAC-1 Tubing Anchor/Catchers are used to allow placement of tubing in tension. Vertical tubing movement is prevented which in turn lessens sucker rod tubing wear. Their small o.d. and large i.d. permits larger volume production capacities. These fully retrievable tools can be easily adjusted for emergency release by adding or removing shear pins. They are available for 4 1/2” through 7 5/8” casing.



 
 
Copyright©2015 Scoton Oilfield All Right Reserved